Gas Water Heater Pilot Light Won't Stay Lit: Causes and Fixes
Why the pilot keeps going out, what you can safely check, and when to call a professional.

If your gas water heater's pilot light keeps going out, you are likely dealing with no hot water or water that is only lukewarm. The good news is that the cause is usually one of a few common parts. This guide explains how the pilot works, the most common reasons it will not stay lit, and what Attleboro homeowners can safely check before calling for service.
How the Pilot Light Works
On gas water heaters with a standing pilot, a small flame burns while the pilot is operating. When the water cools, the gas valve opens and the pilot lights the main burner. A safety part called the thermocouple sits in the pilot flame. As long as it senses heat, it keeps the gas valve open. If the flame goes out, the thermocouple cools and the gas shuts off. This protects your home, but it also means a weak or dirty flame can cause the whole system to shut down.
Do all water heaters have a pilot light? Electric water heaters do not use a pilot light. Some gas models have a standing pilot, while others use electronic ignition. Check your model manual to identify which ignition system you have.
Common Reasons the Pilot Won't Stay Lit
1. A Worn or Faulty Thermocouple
This is the most common cause. If the pilot lights while you hold the button but goes out as soon as you let go, the thermocouple may be worn out or not sitting fully in the flame. Thermocouples are a low-cost part, but they must be installed correctly.
2. A Dirty or Clogged Pilot Tube
Dust and debris can partly block the small pilot opening. The flame then becomes weak, yellow, or uneven and does not heat the thermocouple enough. A healthy pilot flame is mostly blue and wraps around the tip of the thermocouple.
3. Drafts Around the Water Heater
Water heaters in basements, garages, and utility closets can be affected by drafts from open doors, windows, or fans. In older Attleboro homes, drafty basements are common in the colder months. Make sure the outer burner cover is in place.
4. Not Enough Combustion Air
Gas water heaters need fresh air to burn properly. If the unit is in a small closet or boxes are stacked around it, the flame can be starved of air. Keep the area around the base clear.
5. A Tripped Flammable Vapor Sensor
Many units made after 2003 have a sensor that shuts off the pilot if it detects fumes from gasoline, paint, or solvents. Store these products away from the water heater. If the sensor has tripped, the unit may need service before it will light again.
6. A Failing Gas Control Valve
If the thermocouple is new and the pilot is clean but the problem continues, the gas control valve may be failing. This is a bigger repair and should be handled by a professional.
What You Can Safely Check
- Follow the lighting instructions on the label on your tank.
- Look at the pilot flame through the viewing window. Note whether it is blue and steady or yellow and weak.
- Check for drafts and make sure the burner cover is in place.
- Clear stored items away from the base of the unit.
- Make sure other gas appliances are working, which tells you gas is reaching the house.
If you smell gas, do not try to light the pilot. Leave the house and call your gas utility from outside.
When to Call a Professional
Call for service if the pilot goes out again after one or two careful relighting attempts, if the flame is yellow or lifting off the pilot, or if you see scorch marks around the burner door. These can point to a venting, air supply, or gas valve problem. Learn more about gas water heater repair in Attleboro, or read our guide on common causes of no hot water.
Frequently Asked Questions
1. How much does it cost to replace a thermocouple?
The part itself is inexpensive. The total cost depends on the unit and the service call. Ask for a clear estimate before work starts.
2. Why does my pilot light go out only on windy days?
Strong wind can cause downdrafts in the vent pipe and blow out the pilot. A technician can check the vent cap and venting setup.
3. What color should the pilot flame be?
Mostly blue with a small yellow tip. A large yellow or orange flame often means the pilot is dirty or not getting enough air.
4. Should I replace my water heater if the pilot keeps going out?
Not always. Most pilot problems are repairable. If the unit is more than 10 years old and has other issues, it may be worth comparing repair and replacement.
Get Help With Your Pilot Light in Attleboro
If your pilot light keeps going out, call 15083165173 to be connected with a water heater service provider serving Attleboro, South Attleboro, and Hebronville.
